Menu
Your Cart

Yamaha PC412-D Power Amplifier

Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier
Yamaha PC412-D Power Amplifier

Yamaha PC412-D Power Amplifier

AED 20,727
  • Stock: In Stock
  • Model: PC412D

Yamaha PC412-D 4 x 1900W at 4. 20 x 8 input matrix function. DSP. 16ch Dante input/output.

The PC-D / DI series is so much more than just amplifiers—they are the first power amps ever to be capable of forming the core of a completely connected audio network for multi-zone installed or live sound applications. The ever-changing demands and rapid advances of amplifier technology and sound reinforcement, in general, require both versatility and power, and this series has plenty of both. Now you can leverage the power and flexibility of the most comprehensive matrix processing to be found on a power amplifier, all enhanced by the simplicity and ease of Dante connectivity, to create a fully integrated, effective sound solution. What’s more, full compatibility with the ProVisionaire series gives you complete control over the entire network chain, from mixers through to amplifiers, processors, and speakers. In short, the PC-D / DI series gives you what every sound engineer has always dreamed of—total control.

KEY FEATURES

  • 4 x 1200W at 8Ω
  • 20 x 8 powerful input matrix function
  • The sampling frequency is up to 96k
  • 16ch Dante input/output
  • Speaker processors such as 16 band PEQ, crossover, filters, delay and limiter
  • Yamaha Speaker presets
  • Remote control via ProVisionaire Touch/Control

Product Specifications

  • Output Power; 1kHz, Non-clip, 20msec Burst, All channels driven

    • 16Ω: 600W x 4

    • 8Ω: 1200W x 4

    • 4Ω: 1900W x 4

    • 2Ω: 2500W x 4

    • 8Ω (BRIDGE mode): 3800W x 2

    • 4Ω (BRIDGE mode): 5000W x 2

    • Hi-Z (70V mode): -

    • Hi-Z (100V mode): -

  • Amplifier Class: Class D, Single ended output

  • Total Harmonic Distortion: 0.01% (8Ω, 1kHz, 10W, All channels driven); 0.1% (4Ω, 1kHz, Half power, All channels driven)

  • Frequency Response: +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru)

  • Crosstalk: ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted)

  • S/N Ratio: 112dB (8Ω, Gain setting = 32dB, A-weighted)

  • 8Ω Volume Max:

    • 32.0dB/+10.0dBu (Gain setting: 32dB)

    • 26.0dB/+16.0dBu (Gain setting: 26dB)

    • 38.0dB/+4.0dBu (Gain setting: +4dBu)

    • 28.0dB/+14.0dBu (Gain setting: +14.0dBu)

  • Hi-Z 100V Mode, Volume Max: -

  • Hi-Z 70V Mode, Volume Max: -

  • Load Protection:

    • POWER switch on/off: Output mute

    • Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset

    • DC-fault: Power supply shutdown (NOT restored automatically)

  • Amplifier Protection:

    • Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically)

    • Over current: Output mute (Restored automatically)

    • Over voltage: Output limiter (Restored automatically)

    • Integrated Power Limit: Output limiter (Restored automatically)

  • Power Supply Protection:

    • Thermal: Output limiter (Restored automatically) → Power supply shutdown

    • Over voltage: Power supply shutdown

    • Over current: Power supply shutdown

  • Cooling: 7 step variable speed fan x 3, front to rear airflow

  • Maximum Input Voltage: +28dBu

  • Input Impedance: 20kΩ (balanced)

  • Sampling Frequency Rate: 96kHz

  • A/D D/A Converters: AD: 24-bit linear; DA: 24-bit linear

  • Channel Count: 16 IN with Dante Redundancy, 16 OUT

  • Sampling Frequency: 96/88.2/48/44.1kHz

  • Dante Latency: 0.25/0.5/1/2/5ms

  • Bit Depth: 32/24bit

  • Processors: 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR), PEQ (16 band IIR/FIR), Delay, Peak Limiter, RMS Limiter

  • Latency:

    • Analog Input to Speakers: 1.5msec

    • Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz)

  • Analog Input: XLR-3-31 x 4

  • Digital I/O: Dante Interface: etherCON x 2 (Redundant/Daisy Chain)

  • Speaker Output: Neutrik speakON NL4 x 4

  • Control Ports: RJ45 x 1

  • AC: AC inlet (powerCON 20A) x 1

Newsletter

* E-Mail:

* List: