On-board mixer and matrix functions further reduce the overall cost of smaller installations, with set up and remote control enabled by an embedded web page that can be accessed via Ethernet or integrated Wi-Fi.

Key Features

• Four balanced/unbalanced analog inputs (line or microphone level)
• SPDIF digital input/output, plus four Dante or AES67 inputs (nanoNXAMP4-D only)
• Four-channel Class-D amplifiers with ultra-low distortion for uncompromised sound quality (4 x 250W at 4 ohms)
• Universal power supply (100-240V) with PFC technology for efficiency and smooth current draw
• Remote control through integrated WiFi access point or via the Ethernet port
• Amplifier channels: 4x channels, 2 by 2 bridgeable
• Max output power:
  • 4 channels mode / 8 ohms: 4x 200W
  • 4 channels mode / 4 ohms: 4x 250W
  • 4 channels mode / 2 ohms: 4x 250W
  • 2 channels mode / 8 ohms: 2x 200W
  • 2 channels mode / 4 ohms (bridged): 2x 350W
• Power consumption:
  • Idle: 20W
  • Standby: <2W
  • Standby (without network): <0.5W
• Frequency response: +0/-0.25 dB from 20 Hz to 20 kHz
• Input impedance / Sensitivity: 20 KΩ / +13 dBU
• Dynamic range / THD + N: >106 dB A-weighted / <0.05% distortion (flat setup)
• Latency: 1ms (flat setup)
• Audio converters: 24-bit @ 48 kHz
• Processing: 64-bit DSP
• Analog audio inputs: 4x balanced analogue inputs (Euroblock 3.5 mm pitch) or unbalanced on RCA
• Power outputs: 4x Euroblock 5 mm pitch outputs
• Digital audio I/O: 1x SPDIF 2ch input/output (RCA) + 1x Dante 4ch input
• GPIO Port: 1x Euroblock 3.5 mm pitch with 4x global-purpose inputs and 1x global-purpose output
• Network inputs: 1x 100 Mb Ethernet port for remote control
• Mains socket: 1x IEC C14 socket
• Front panel LEDs: 5 LEDs (WiFi / Network / Output / Input / Status)
• Remote control options: via 100 Mb Ethernet port or integrated WiFi (access point or client)
• Mains voltage: universal power supply with Active PFC (100-240V, 50/60Hz)
• Power consumption (1/8 max. 4 ohms load): 250W
• Size & weight: 1U, half-rack (44.5 x 220 x 296 mm), 2.8 kg (6.2 lbs)
• Safety certification: IEC62368-1 2nd edition, UL62368-1
• EMC certification: FCC Part 15 Class B, CAN/CSA-CISPR 22-10, EN55032/CISPR32, EN61000
• Eco compliance: ROHS & Reach directive