The Fender Tone Master Twin Reverb — here in textured Blonde vinyl with an Oxblood grille — is a stunning facsimile of a '60s-era all-tube Twin, built using the latest in Fender digital amplification and loaded with ultralight Celestion neodymium-magnet speakers for a distinct rock 'n' roll voicing. Faithful modeling of the classic tube architecture gives the Tone Master all the headroom, output, and reactivity of the original at a massive weight savings. A solid pinewood cabinet further shaves off poundage. Inside you'll find a pair of 12" Celestion Neo G12 Creamback speakers voiced to handle everything from Midwest indie pop to wide-open hard rock covers. Around back, a 5-way power attenuator transparently reduces wattage to let you achieve just the right tube-flavored cluck and breakup for any live and studio setting. You also get an XLR balanced output with your choice of flat-response or two onboard cab simulations for silent performance and recording.

Faithful digital modeling

Using the latest in Fender modeling technology, the Tone Master is able to capture the sound and performance of the seminal all-tube Twin Reverb. The harmonic sparkle. The chewy breakup. The highly reactive tone stack. Even digital models of the iconic spring reverb and tube tremolo. It's all here in the Tone Master Twin Reverb Blonde. And when it comes time to fill a stage, the Tone Master has output to spare — this 200-watt solid-state amp packs SPLs comparable to the 85-watt tube classic.

Onboard power attenuation

The Tone Master allows you to dial back wattage to 0.2 watts to achieve the desired level of breakup, even run full tilt, in the quietest rooms and venues.

Celestion G12 Neo Creamback speakers

A pair of hand-picked 12" Celestion G12 Neo Creamback speakers give the Tone Master Twin Reverb Blonde a similar stage-filling punch and vocal-like midrange to the G12M Greenback, beloved by players from Eric Clapton to Eddie Van Halen, but with much higher handling. And thanks to their neodymium magnets, the Neo Creambacks weigh in significantly lighter than their classic counterparts. This helps reduce weight for an easier carry from the car to the stage, with no loss in tone.

Lightweight pine cab

The Tone Master Twin Reverb Blonde features a solid pine cabinet for a lighter haul at no compromise to tone. Though looking at it, you'd never know: the textured Blonde vinyl and Oxblood grille cloth give this amp that undeniable Fender appeal.

Speaker-emulated XLR output

One of the Tone Master Blonde's more modern features is its XLR balanced output, which is useful for creating a silent stage or recording sets without a mic. Two onboard cab IRs (impulse responses) give you a direct feed out to a soundboard. Here you can choose between the familiar bite of a Shure SM57–miked speaker or the smooth punch of a Sennheiser MD421. Alternatively, a flat-response option provides seamless integration with your existing IRs. There's also a ground switch and level control for noise reduction and proper gain staging.

Fender Tone Master Twin Reverb Blonde 200-watt Guitar Combo Amplifier Features:

• All the look, tone, and output of a Blonde 85W all-tube Twin
• The latest in solid-state digital tone modeling
• Massive weight savings — about half the weight of a traditional Twin
• Familiar tone stack performance
• 5-way attenuator dials back power to 0.2 watts
• 2 x 12" Celestion G12 Neo Creamback speakers bring a distinctive rock 'n 'roll voicing to the Tone Master amp
• Solid pinewood cabinet in Blonde textured vinyl with an Oxblood grille cloth
• Balanced XLR out with output control, selectable cab IRs (SM57 or MD421), and ground lift
• Includes a 2-button footswitch for reverb and tremolo switching and cover

Tech Specs

• Type:Solid State
• Number of Channels:2
• Total Power:200W (1W, 5W, 12W, 22W, 40W, 85W selectable)
• Speaker Size:2 x 12" Celestion G12 Neo Creamback
• Reverb:Digital Reverb
• Effects:Tremolo
• Amp Modeling:Twin Tube Amp Emulation
• EQ:3-band EQ
• Inputs:2 x 1/4" (normal), 2 x 1/4" (vibrato channel)
• Outputs:1 x XLR (DI out)
• USB:1 x Type B
• Footswitch I/O:1 x 1/4" (channel, effect)
• Footswitch Included:Yes, 2-button footswitch
• Features:Tilt-back option
• Computer Connectivity:USB (firmware updates)
• Construction Material:Lightweight Solid Pine with Blonde Textured Vinyl
• Power Source:Standard IEC AC cable
• Height:20.24"
• Width:26.6"
• Depth:10.35"
• Weight:33 lbs.