Look no further than the AHUJA APA480 PA Amplifier 600W with 1 priority 2 Aux Inputs. This amplifier features 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs. It also has a ground lift switch to reduce hum, a resettable circuit breaker for protection against overload and short circuit, and a loop through output for connecting another booster amplifier. Plus, it has a 19” rack-mountable chassis and an instant transfer to DC power (Car Battery) if AC power fails.

Features:

• 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
• 100V input is provided for connecting another amplifier’s output in long line applications.
• Ground lift switch provided at rear panel which helps to reduce the hum that occurs due to multiple ground loops in the installations.
• Resettable circuit breaker for protection against overload and short circuit.
• Loop through output for connecting another booster amplifier.
• 19” Rack-mountable chassis.
• Instant transfer to DC power (Car Battery) if AC power fails.

Specification:

• Power Output: 750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS at 2% THD, 480W RMS at 1% THD
• Output Regulation: ≤ 2 dB, no load to full load at 1kHz
• Input Channels: 1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input/50kΩ
• Frequency Response: 50-15,000Hz ±3dB
• Signal to Noise Ratio: 60dB
• Tone Controls: Bass ±10dB at 100Hz, Treble ±10dB at 10kHz
• Outputs Loop Through: 1 × 200mV/600W, 2 × 1V/1kW
• Speaker Outputs: 4Ω, 8Ω, 70V & 100V
• Power Supply AC: 220-240V 50/60Hz, DC: 24V (2×12V Car Battery)
• Power Consumption: AC: 1200VA, DC: 15A
• Dimensions: W485 × H142 × D510 mm